Coilcraft XGL3014 Series Shielded Power Inductors Comprehensive Guide

The ultra-low profile XGL3014 Series offers the lowest DC losses and extremely low AC losses for a wide range of DC-DC converters. This exceptional characteristic makes them an optimal choice for a variety of applications where space is limited and efficient power management is critical, including different non-isolated converter topologies, point-of-load (POL), IoT devices, and many other applications.





With an industry-leading 80 V voltage rating, these components are suitable for wide Vin DC-DC converters and applications. Additionally, their AEC qualification ensures reliability and robustness in automotive and other harsh environments.

Industry's lowest DCR and ultra low AC losses over a wide frequency range


Superior current handling with soft saturation characteristics

AEC-Q200 Grade 1 (−40°C to +125°C)

Wide inductance range from 0.082 µH to 1.8 µH

RoHS-compliant, halogen free. 260°C compatible. Tin-silver (96.5/3.5) over copper terminations

COTS Plus tin-silver-copper and tin-lead terminations available


Specifications

Electrical specifications at 25°C. Operating voltage 0 — 80 V




Notes

When ordering, please specify termination and packaging codes: e.g. XGL3014-182MEC

Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.

DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.

SRF measured using an Agilent/HP 4395A or equivalent.

Isat: DC current at 25°C that causes the specified inductance drop from its value without current.

Temperature derating curves.

Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.


Termination:

E = Halogen free component. RoHS compliant tin-silver over copper terminations.

T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)

S = non-RoHS tin-lead (63/37). (Special order, added cost)

Packaging:

C = 7" machine-ready reel

EIA-481 embossed plastic tape (2000 parts per full reel).

Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

D = 13" machine-ready reel

EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).


Environmental

RoHS compliant , halogen free

 

Ambient temperature range:

–40°C to +125°C with (40°C rise) Irms current

 

Storage temperature range:

Component: –55°C to +165°C.

Tape and reel packaging: –55°C to +80°C

 

Maximum part temperature:

+165°C (ambient + temp rise)

 

Failures in Time (FIT) / Mean Time Between Failures (MTBF):

See FIT/MTBF Calculations




Comments

Post a Comment

Popular posts from this blog

How To Build an Optocoupler-Based 24V Relay Driver Using the TLP3120

Image
 Introduction When working with high-voltage or high-current systems, it is often necessary to isolate the control circuit from the load circuit to ensure safety and reliability. Optocouplers (or optocoupling devices) serve as an excellent solution for electrical isolation, enabling you to control high-power devices while protecting sensitive electronics from voltage spikes, noise, or ground loops. One such optocoupler, the TLP3120, is a powerful component used for driving relays, controlling motors, or switching AC loads with the benefit of electrical isolation. The TLP3120 is a high-speed photorelay that can handle switching operations up to 1A of load current and 60V of voltage, making it ideal for controlling 24V relays or other medium-power loads. In this DIY project, we will design and build a 24V relay driver circuit using the TLP3120 optocoupler. The circuit will allow you to control a 24V relay with a low-voltage signal (e.g., from a microcontroller or a control switch), p...
Read more

What Is Gain On An Amplifier?

Image
 1. What is Gain The gain of an amplifier (Gain) refers to the ratio of the amplifier's output signal (voltage, current, or power) to the input signal under specific conditions (such as frequency, load, etc.). It is commonly used to measure the amplifier's ability to amplify a signal. This article will explain what is gain on an amplifier, introduce the different types of gain, how gain affects the performance of an amplifier, and its relationship with other factors. 2. Types of Gain Gain can be categorized as voltage gain, current gain, or power gain, depending on the type of amplifier and the performance metric being considered. 2.1 Voltage Gain (Av) Voltage gain is defined as the ratio of the output voltage (Vout) to the input voltage (Vin) of the amplifier, and it is typically expressed in decibels (dB) as follows: Av(dB) = 20*log10(Vout/Vin) Voltage gain describes the amplifier's ability to increase the amplitude of the signal voltage. 2.2 Current Gain (Ai) Current gai...
Read more